 |
Universal Seat Belt Extender / Extension
Click on Photo to Enlarge!
Go to our Seat Belt Extender Main Page to see detailed installation seatbelt extensions instructions and belt extenders colors and more new info! We have 3 seatbelt extenders colors.

|
 |
 |
Angle Bracket - #A904L - Installation Foor Mount Seat Belt End
Use to mount seat belt retractor or hard sleeve female end in floor mount applications. Included with WELR hardware kits.
Price includes 1 piece. The width is 1¼" and one side is 2" long and the other is 1¾" long.

|
 |
 |
6 Inch Seat Belt Extension Bracket - DRIVER SIDE This 6" extension bracket is necessary for driver side high middle console applications (as with Jeep Wranglers and others) or with any application where extra length is needed. The 6" extension bracket brings the buckle of the seat belt up higher so that it clears the high middle console. Click Here to view how it attaches to the seat belt end. This includes 1 bracket only (no bolts, washers etc.)

|
 |
 |
6 inch Extension Angle Bracket - PASSENGER SIDE This 6 inch extension angle bracket is the same as above, but it is for the passenger side seat belt. Needed for high middle console applications (as with some Jeep Cherokee, Wranglers and others). Brings the buckle of the seat belt higher so that it clears the higher middle console. Click Here to see attachment. Includes 1 bracket only (no bolts, washers etc.)

|
 |
 |
Bucket Seat 11 inch Plastic Sleeve - Only
These are our bucket seat style 11" seat belt plastic sleeves, that include the sleeve only (no seat belt). Round cap pops on and off for tightening hex bolt on seat belt end. Price includes 1 sleeve. Click Colors to enlarge!
Available in Black, Blue, Charcoal, Lt Grey and Tan.
Click on Photo to Enlarge!
Click Here to see side view!

|
 |
 |
212 Mounting Hardware Includes 2ea. 7/16" SAE fine thread 1½" long grade 5 bolts, nuts with lock washers (or lock nuts), 2ea. large fender washers for easy seat belt installation.
Click on Photo to Enlarge!

|
 |
 |
210 Seat Belt Hardware Mounting Kit
Includes 2ea. 7/16" SAE fine thread 1½" long grade 5 bolts, nuts with lock washers (or lock nuts), and 2 flat washers for easy installation.
Click on Photo to Enlarge!

|
 |
 |
3 Point Retractable Seat Belt Mounting Hardware Kit Hardware kit includes 1 Angle Bracket, 2ea. 7/16" SAE fine thread grade 5 bolts, nuts and lock washers (or lock nuts), large fender washers. 1 Shoulder Bolt & one 10154 mounting Plate.
Click on Photo to Enlarge!

|
 |
 |
3 Point NON-Retractable Seatbelt Hardware Mounting Kit Hardware kit includes 2ea. 7/16" SAE fine thread grade 5 bolts, nuts and lock washers (or lock nuts), 2ea. large fender washer. 1 Shoulder Bolt & one 10154 Mounting Plate.
Click on Photo to Enlarge!

|
 |
 |
AM 4 Point Seat Belt Hardware Kit Hardware includes 3 each of: 7/16" fine thread grade 5 hex bolts, nuts, lock washers (or lock nuts) and large fender washers. Click on Photo to Enlarge!

|
 |
 |
Mounting Plate 7/16" SAE fine thread. This mounting plate must be used for applications where no factory anchor points have been established. This plate is to be installed on the underside of the floor board or inside the door post. Outside dimensions: 1½" x 3" Price includes 1 piece.
Click on Photo to Enlarge!
How to Retrofit 3-point Seat Belts Shoulder Bolt Anchor Point

|
 |
 |
Snap End Click on Photo to Enlarge! Easily snaps onto an eye bolt. Want to see? Click Here Link not Working?Click Here Includes 1 piece.

|
 |
 |
Shoulder Bolt 7/16" SAE fine thread and 1½" long. The non-threaded portion located just below the hex bolt head is 9/16" in diameter. Includes 1 piece.
Click on Photo to Enlarge!

|
 |
 |
Eye Bolt Kit Price includes 1 each: 7/16" SAE fine thread eye bolt (threaded portion is 1-3/4" long), nut and large fender washer.
Click on Photo to Enlarge!

|
 |
 |
Racing and Off-Road Harness Bolt Tab
This harness bolt tab can be used with either 2" or 3" webbing (belts). Price includes 1 piece.
Important: This item is to be used with racing and off-road harnesses Only (Not for passenger car seat belts).
Click on Photo to Enlarge!

|
 |
 |
Racing and OffRoad 2" Harness Slide Bar
This 2" harness slide bar is to be used with 2" webbing (belts). Price includes 1 piece.
Important: This item is to be used with racing and off-road harnesses Only (Not for passenger car seat belts).
Click on Photo to Enlarge!

|
 |
 |
Off Road and Racing Harness 3" Slide Bar
This 3 inch harness slide bar is to be used with 3 inch webbing (belts). One piece is included with price.
Important: This item is to be used with racing and off-road harnesses Only (Not
for passenger car seat belts).
Click on Photo to Enlarge!

|
 |