 |
Quick Release Unit / CamLock Harness - 3 inch Racing Harness: New Lightweight RJS quick release camlock racing seat belt unit available with the choice of either the lap belt adjustable from floor up (pull up to tighten - usually used in smaller compartments such as a dragster, dwarf car etc.) or standard body down (pull down to tighten). Also, choose if you want the cam lock (cam-buckle) attached to the lap belt (if you don't intend to use the sub-belt...street racers) or to the sub-belt (most race cars). Click on Photo to Enlarge! Design the camlock harness which is best for your race car from the drop-down menus below. The camlock racing seat belt unit is made of military spec. aircraft aluminum and high strength alloy steel. Release all straps simultaneously by turning the cam lock left or right. Constructed with your choice of shoulder harnesses, either our RJS 50519 individual shoulder harnesses (shown in photos) that comes with hardware for either bolt on or wrap around ends...(both included) or the 50516 roll bar mount "V-Type" bolt end or you can choose snap ends for either shoulder harness type. Also, your choice of 2" or 3" sub belts (crotchbelt). This cam-lock harness includes, lap belt, shoulder harness and sub belt which all latch into the quick release unit for rapid release of all belts with a quick turn of the knob. (2" Sub belts not available in green or orange)Close-up view of the CamLock quick release? Click Here Link not Working? Click Here
Cam Lock Quick Release Seat Belt installed? Click Here Link not Working? Click Here
What are Bolt Ends? Click Here Link not Working? Click Here
What are Wrap Around Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here
What is a Sternum Strap? Click Here Link not Working? Click Here


|
 |
 |
Individual Wrap Around Seat Belts Racing 3 inch lap belt, 3" shoulder harness and 2" single sub belt (3" is optional for $3 more). Lap extends from 18 to 64 inches. These seat belts come with ends that can be used as either Individual Wrap Arounds or Bolt Ends. (When you order your belt with Bolt Ends, the Bolt End hardware is included, but you can take the hardware off and use the ends as Wrap Around Ends - either option). 2" sub belts are not available in green or orange.Click on Photo to Enlarge!
What are Bolt Ends? Click Here Link not Working? Click Here
What are Wrap Around Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here

|
 |
 |
Roll Bar Mount Seat Belt racing 3 inch lap belt, 3" shoulder harness roll bar mount (Bolt Ends) and 2" single sub belt (3" is optional for $3 more). Lap extends from 18 to 64 inches. 2" sub belts are not available in orange or green.
What are Bolt Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here
Click on Photo to Enlarge!

|
 |
 |
2" JR. Dragster Harness Racing Seat Belts This 2" five-point racing seatbelt is our Jr. Dragster seat belt and is available as roll bar mount with bolt ends, individual wrap arounds or snap ends. If you choose the option for the Individual Wrap Arounds #50515, the harness includes the hardware for Bolt Ends or it can be used as Wrap Arounds (it comes with both options). Not available in orange or green. Click on Photo to Enlarge!
What are Bolt Ends? Click Here Link not Working? Click Here
What are Wrap Around Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here

|
 |
 |
Lap Belts

|
 |
 |
Snap End Lap Belts Features no side adjustments to rub hips. Adjustable 18" to 64" with standard pull down tightening strap. This belt features a solid lever latch and link quick release buckle. Many colors to choose from. All hardware included for this belt - 2 Eye Bolt Kits
What are Snap Ends? Click Here Link not Working? Click Here
2" is not available in orange or green.

|
 |
 |
Bolt End Lap Belt Features no side adjustments to rub hips. Adjustable 18" to 64" featuring a rugged lever latch and link quick release buckle and standard pull down tightening strap. Many colors to choose from. Price includes 1 belt for 1 seat. Click on Photo to Enlarge!
What are Bolt Ends? Click Here Link not Working? Click Here
2" is not available in orange or green.

|
 |
 |
Wrap Around Lap Belts Mounted as a wrap around with two 3" adjusting slide bars. Adjustable 18" to 64" with standard pull down tightening strap and a sturdy lever latch and link quick release buckle. Many colors to choose from. Click on Photo to Enlarge!
What are Wrap Around Ends? Click Here Link not Working? Click Here
"2" is not available in orange or green.

|
 |
 |
Shoulder Harnesses

|
 |
 |
3" Shoulder Harness - Roll Bar Mount
For use with 3" lap belt unit. Will work with other units of 3" type. Each side extends up to 37" This is a Bolt End Harness, but a Snap End can be added to roll bar harness by choosing snap end option below. Can be mounted anywhere there is a structural tube running horizontally behind driver and near shoulder level. Can be used in any latch type belt. Comes with mounting tabs on harness.
What are Bolt Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here

|
 |
 |
2" Shoulder Harness - Roll Bar Mount Comes with Bolt Ends unless you choose the option for Snap Ends. For use with 2" belt units. Extends up to 44" total length. Snap end can be added to roll bar harness by adding the option below. Can be mounted anywhere there is a structural tube running behind the driver and below shoulders. Can be used in any latch type belt.
What are Bolt Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here

|
 |
 |
3" Shoulder Harness - Either Wrap Around or Bolt End Mount Designed to mount with either bolt-ends or wrap-around ends. These harnesses come with ends that can be used as either Individual Wrap Arounds or Bolt Ends. (The Bolt End hardware is included, but you can take the hardware off and use the ends as Wrap Around Ends - either option). They are individual mount. Designed to work with any latch type belt. Long enough to reach all the way to floor. Extends up to 78" each side. Price includes 1 set of two.
What are Wrap Around Ends? Click Here Link not Working? Click Here
What are Bolt Ends? Click Here Link not Working? Click Here

|
 |
 |
2" Shoulder Harness - Wrap Around Designed to mount with either bolt-ends or wrap-around ends. These seat belts come with ends that can be used as either Individual Wrap Arounds or Bolt Ends. (The Bolt End hardware is included, but you can take the hardware off and use the ends as Wrap Around Ends - either option). They are individual mount.Completely adjustable, individual mount. Extends up to 62 inches each side. Can be used with any latch type belt. Price includes 1 set of two.
What are Bolt Ends? Click Here Link not Working? Click Here
What are Wrap Around Ends? Click Here Link not Working? Click Here

|
 |
 |
2" Shoulder Harness - Bolt in Designed to work with any latch type belt. Each side extends up to 56½" Price includes 1 set of 2.
What are Bolt Ends? Click Here Link not Working? Click Here
What are Snap Ends? Click Here Link not Working? Click Here

|
 |
 |
Double Submarine Belts

|
 |
 |
3" Double Submarine Belt Some racing associations require 2 anchor points for all submarine (crotch) belts. If this applies to you, then this is the submarine belt that you'll need! Extends up to 33½" each side.

|
 |
 |
2" Double Submarine Belt A specially designed double unit. For use with 3" lap belt. Extends up to 33½" each side.

|
 |
 |
|
 |
 |
3" Submarine Belt Should be used with any 3" assembly. Extends up to 26½"

|
 |
 |
2" Submarine Belt, Fully Adjustable Extra long for Sprints, Modified, Midgets. Extends up to 42½"

|
 |
 |
2" Single Submarine Belt For use with 3" lap belt. Super Modified, Mini Modified, Late Models. Extends up to 28½"

|
 |
 |
2" Submarine Belt, Fully Adjustable Same as 50506 above, only this belt is Double Adjustable. Extends up to 35"

|
 |
 |
Sternum Strap for Seat Belt System
Click on Photo to Enlarge!
This Sternum Strap can be added to any model racing shoulder harness that we carry. (Photo shows it with 50516 roll bar mount shoulder harness). This system is designed to hold the harness together under impact.
Just add this sternum strap to the shopping cart as well as the shoulder harness that you would like to buy, and we will customize the harness by attaching the sternum strap to the harness. And yes, it maintains its SFI rating and the dated SFI tag is attached.
Any harness that is customized with a sternum strap as described above, is considered a custom seat belt and therefore is NOT returnable.

|
 |
 |
Mounting Hardware for Seat Belts 

|
 |
 |
Angle Bracket 
Use to mount seat belt retractor in floor mount applications. Included with WELR hardware kits. Price includes 1 piece.
Click on Photo to Enlarge!

|
 |
 |
Mounting Plate 7/16" SAE fine thread. Price includes 1 piece. For retrofitting 3-point seat belts.
Click on Photo to Enlarge!

|
 |
 |
Eye Bolt Price includes 1 each: 7/16" SAE fine thread eye bolt (threaded portion is 2" long), nut and 3" fender washer.
Click on Photo to Enlarge!

|
 |
 |
Shoulder Bolt 7/16" SAE fine thread bolt. Price includes 1 piece.
Click on Photo to Enlarge!

|
 |
 |
Snap End Price includes 1 piece.
Click on Photo to Enlarge!
Easily snaps onto an eye bolt. Want to see? Click Here Link not Working?Click Here

|
 |
 |
Racing and Off-Road Harness Bolt Tab
This harness bolt tab can be used with either 2" or 3" webbing (belts). Price includes 1 piece.
Important: This item is to be used with racing and off-road harnesses Only (Not for passenger car seat belts).
Click on Photo to Enlarge!

|
 |
 |
Racing and OffRoad 2" Harness Slide Bar
This 2" harness slide bar is to be used with 2" webbing (belts). Price includes 1 piece.
Important: This item is to be used with racing and off-road harnesses Only (Not for passenger car seat belts).
Click on Photo to Enlarge!

|
 |
 |
Off Road and Racing Harness 3" Slide Bar
This 3 inch harness slide bar is to be used with 3 inch webbing (belts). One piece is included with price.
Important: This item is to be used with racing and off-road harnesses Only (Not
for passenger car seat belts).
Click on Photo to Enlarge!

|
 |